| dc.contributor.author | Darsin, Mahros | |
| dc.contributor.author | Pasang, Tim | |
| dc.contributor.author | Chen, Zhan | |
| dc.date.accessioned | 2018-07-13T04:00:10Z | |
| dc.date.available | 2018-07-13T04:00:10Z | |
| dc.date.issued | 2018-07-13 | |
| dc.identifier.uri | http://repository.unej.ac.id/handle/123456789/86302 | |
| dc.description | The 3rd International Conference on Precision Machinery and Manufacturing Technology 2018 | en_US |
| dc.description.abstract | This paper concerns on drillability of Ti-6Al-2Sn-4Zr-6Mo (Ti6246)
from the point view of thrust force (Fz) & torque (Mz) using a
TiAlN CVD coated carbide tool. The condition of the material was varied
with three different heat treatments. Whereas, the machining parameters
were varied in cutting speed, feed rate and cooling application method.
Taguchi method L-18 was employed to design the experiments. The thrust
force and torque were measured using a Kistler dynamometer, and the data
were analyzed using a Minitab 17 software. The thrust force was
influenced by the cutting speed 24%, depth of drilling 21%, heat treatment
13%, and feed rate 11%. The torque was influenced predominantly by feed
rate up to 94%. Coolant application has no effect on reducing both thrust
force as well as torque. | en_US |
| dc.language.iso | en | en_US |
| dc.subject | Titanium Alloy 6Al-2Sn-4Zr-6Mo | en_US |
| dc.subject | Drillability | en_US |
| dc.subject | Cutting Forces Point of View | en_US |
| dc.title | Drillability of Titanium Alloy 6Al-2Sn-4Zr-6Mo: Cutting Forces Point of View | en_US |
| dc.type | Abstract | en_US |
