Please use this identifier to cite or link to this item: https://repository.unej.ac.id/xmlui/handle/123456789/86299
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDarsin, Mahros-
dc.contributor.authorPasang, TIm-
dc.contributor.authorChen, Zhan-
dc.date.accessioned2018-07-13T03:23:44Z-
dc.date.available2018-07-13T03:23:44Z-
dc.date.issued2018-07-13-
dc.identifier.issn2541-6332-
dc.identifier.urihttp://repository.unej.ac.id/handle/123456789/86299-
dc.descriptionJEMMME, Vol.3, No. 1, May 2018en_US
dc.description.abstractThis paper concerns on drillability of Ti-6Al-2Sn-4Zr-6Mo (Ti-6246) from the point view of thrust force (Fz) & torque (Mz) using a TiAlN CVD coated carbide tool. The condition of the material was varied with three different heat treatments. Whereas, the machining parameters were varied in cutting speed, feed rate and cooling application method. Taguchi method L-18 was employed to design the experiments. Both type of forces, thrust force and torque, were measured using a Kistler dynamometer, and the data were analyzed using a Minitab 17 software. The thrust force was influenced by the cutting speed 24%, depth of drilling 21%, heat treatment 13%, and feed rate 11%. The torque was influenced predominantly by feed rate up to 94%. Coolant application has no effect on reducing both thrust force as well as torque.en_US
dc.language.isoenen_US
dc.subjectTi-6246en_US
dc.subjectdrillabilityen_US
dc.subjectTaguchi methoden_US
dc.subjectforceen_US
dc.subjecttorqueen_US
dc.titleForces Perspective of Drillability of Titanium Alloy 6Al-2Sn-4Zr-6Moen_US
dc.typeArticleen_US
Appears in Collections:LSP-Jurnal Ilmiah Dosen

Files in This Item:
File Description SizeFormat 
F. T_Jurnal_Mahros D_Forces Perspective.pdf578.79 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.