Search
Now showing items 1-10 of 12
Analysis of the effect 3D printing parameters on tensile strength using Copper-PLA filament
(SINERGI, 2022-02-10)
s research aims to find the optimal combination of parameters to obtain the maximum tensile strength of 3D printing products made of eCopper, which consists of 45% Cu and 55% PLA. The parameters used were nozzle temperature, ...
Optimization of adhesive strength of chrome coating of SS400 using Taguchi method
(Gongcheng Kexue Yu Jishu/Advanced Engineering Science, 2022-02-02)
SS400 is structural steel, which is categorized within low carbon steel. It
could not be hardened by heat treatment. In order to increase its
properties, SS400 is enhanced with surface treatment and surface plating.
Chrome ...
Optimization of Electroplating Thickness Results for SS400 Steel Using the Taguchi Method
(Jurnal Polimesin, 2022-08-31)
SS400 steel is steel with a low carbon content (max 0.17 %C) or low carbon steel. SS400 applications are widely used in the construction industry, railway industry, bridges and others. The use of SS400 which is in direct ...
Fabrication of Polypropylene Filament Using a Single Extruder and Measurement of Its Dimensional Accuracy
(Advanced Engineering Science, 2022-10)
Additive Manufacturing (AM) has been a frontier topic in the industrial revolution 4.0. Out of several AM techniques, fused deposition modeling (FDM) is the most widely used technique. FDM uses filament as input feeding. ...
Analysis of Rice Straw and Ijuk Fiber Composite for Lightweight Material Applications
(Gongcheng Kexue Yu Jishu/Advanced Engineering Science Journal, 2022-06-01)
Many lightweight materials are required to improve many advancements
such as the travel distance of vehicles. Composites are required to be
light, strong and if possible, economical so it may be used to increase ...
Optimizing the Surface Roughness AISI 4340 Steel on Turning Process under Minimum Quantity Lubrication (MQL)
(Materials Science Forum, 2022-03-31)
Application of cutting fluids in machining can improve machinability but it may danger
to the environment. An alternative to reduce this bad effect is by using minimum quantity
lubrication (MQL). This study aims to ...
Akurasi Dimensi Produk Filamen 3D Printing Berbahan Polipropilen Menggunakan Mesin Ekstrusi
(JURNAL TEKNOSAINS, 2022-06-22)
Additive manufacturing (AM) menjadi salah satu topik terkini pada revolusi industri 4.0. Salah satu teknik
AM adalah fused deposition modeling (FDM), yang cara kerjanya dengan mendepositkan lelehan filamen lapis
demi ...
The Effect of Nozzle Temperature, Layer Height, and Infill Pattern on Dimensional Accuracy and Flexural Strength of 3D Printed Cu-PLA Filaments
(AES, 2022-05-01)
This study aims to find the optimal parameters to produce good
dimensional accuracy and maximum bending strength in the FDM 3D
printing using a Cu-PLA filament. The parameters used in this research
are nozzle temperature, ...
Study of Chip Formation in Turning of AISI 4340 under Minimum Quantity Lubrication (MQL)
(Gongcheng Kexue Yu Jishu/Advanced Engineering Science, 2022-04-30)
Applying cutting fluid is a common case in machining, as it can prolong
the tool life. However, excessive using it may cause a bad affect on the
operator and environment. Alternatively, applying minimum quantity
lubrication ...
Pelatihan Pembuatan Bahan Bakar Minyak Nyamplung (Calophyllum inophyllum) bagi Masyarakat Banyuwangi Jawa Timur
(Jurnal Abdi Masyarakat Indonesia (JAMSI), 2022-01)
Seiring kenaikan konsumsi energi minyak dan menurunnya cadangan minyak bumi, maka perlu beralih ke minyak nabati sebagai sumber bahan bakar terbarukan, salah satunya adalah dari biji nyamplung. Biji nyamplung banyak ...