Now showing items 1-10 of 10

    • Analisis Tegangan dan Regangan pada Poros Lokomotif BB 30328 

      JATISUKAMTO, Gaguk; NURKHOYIM K, Muhammad (Jurnal Teknik Mesin ROTOR, Vol. 2, No. 1, Januari 2009, 2009-01-02)
      Penelitian ini bertujuan menganalisis tegangan dan regangan yang menyebabkan perpatahan poros lokomotif kereta api BB 30328 milik PT KAI DAOPS IX Jember. Metodologi pengolahan data menggunakan pendekatan metode elemen hingga ...
    • Analysis of Rice Straw and Ijuk Fiber Composite for Lightweight Material Applications 

      BENTAR, Aidin; JATISUKAMTO, Gaguk; DARSIN, Mahros; JUNUS, Salahuddin; ILMINNAFIK, Nasrul; RIDHA, Fabrobi F (Gongcheng Kexue Yu Jishu/Advanced Engineering Science Journal, 2022-06-01)
      Many lightweight materials are required to improve many advancements such as the travel distance of vehicles. Composites are required to be light, strong and if possible, economical so it may be used to increase ...
    • Analysis of Strontium Addition on Al-Si-MG Aluminum Alloys 

      JUNUS, Salahuddin; EKAINDRADIANT, Prasetya; JATISUKAMTO, Gaguk; WELAYATURROMADHONA, Welayaturromadhona; FITOYO, Achmad (ARPN Journal of Engineering and Applied Sciences, 2021-05-02)
      The use of metal based materials has high potentials following the development of the automotive industry. It follows the increase of demand in automotive vehicles, machine components, and many more. Aluminum is a type ...
    • Design Study of 300MWth GFR with UN-PuN Fuel using SRAC-COREBN Code 

      SYARIFAH, Ratna Dewi; AULA, Mila Hidayatul; ARKUNDATO, Artoto; NUGROHO, Agung Tjahjo; JATISUKAMTO, Gaguk; HANDAYANI, Septy (ARPN Journal of Engineering and Applied Sciences, 2023-02)
      Research related to 300MWth with UN-PuN fuel optimization on GFR using 3D core (X-Y-Z) with the code SRAC-COREBN has been carried out. UN-PuN fuel optimization was carried out by studying neutronic parameter analysis on ...
    • Effect of 3D Printing Parameters on Dimensional Accuracy Using eSteel Filaments 

      DARSIN, Mahros; MAHARDIKA, Nurcholis Alfian; JATISUKAMTO, Gaguk; RAMADHAN, Mochamad Edoward; FACHRI, Boy Arief; HUSSIN, Mohd Sabri (Journal of 3D Printing and Additive Manufacturing, 2021-10-16)
      3D printing technology or additive manufacturing is manufacturing by adding materials to objects until it is shaped as expected. This technique is easy and cheap for printing pol-ymer-based materials in the form of ...
    • Failure Analysis on Titen Proto-XX Car Chassis 

      JATISUKAMTO, Gaguk; QORYAH, Rika Dwi Hidayatul; MULYADI, Santoso (Journal of Mechanical Engineering Science and Technology, Vol. 3, No. 2, November 2019, pp. 88-95, 2019-11-01)
      The car chassis as a skeleton supports all loads and is the most important component. Car chassis requirements must be rigid, twisting resistant, vibration resistant and resistant to fatigue. This study aims to find the ...
    • Karakteristik Spray Diesel dan Campuran Biodiesel Nyamplung pada Ruang Chamber dengan Variasi Temperatur Ambient 

      HAKIM, Lukman; ILMINNAFIK, Nasrul; JATISUKAMTO, Gaguk; KUSTANTO, Moh. Nurkoyim; SANATA, Andi (Jurnal Program Studi Teknik Mesin UM Metro, 2022)
      Karakteristik spray memiliki peran penting dalam meningkatkan kualitas pembakaran di mesin kompresi. Studi ini menganalisis efek temperatur ambient pada karakteristik spray meliputi spray tip penetration, spray angle dan ...
    • Neutronic Analysis On Molten Salt Reactor Fuji-12 Using 235U as Fissile Material In Lif-BEF2-UF4 Fuel 

      MABRURI, Ahmad Muzaki; SYARIFAH, Ratna Dewi; AJI, Indarta Kuncoro; HANIFAH, Zein; ARKUNDATO, Artoto; JATISUKAMTO, Gaguk (Eastern-European Journal of Enterprise Technologies, 2022-10-31)
      Neutronic analysis on the Molten Salt Reactor FUJI-12 using the fissile material 235U in LiFBeF2-UF4 has been carried out. The problem faced in the use of thorium-based fuel is that the amount of 233U is small and not ...
    • Pengaruh Temperatur dan Waktu Penahanan Pack Karburising Terhadap Kekerasan Permukaan Baja Karbon Rendah S30C 

      JATISUKAMTO, Gaguk (JURNAL TEKNIK MESIN, TAHUN 13, NO. 2, OKTOBER 2007: 122-126, 2007-10-01)
      Baja merupakan bahan yang paling banyak digunakan sebagai material konstruksi atau strukutur, karena keunggulan sifat-sifat fisis dan mekanis yang dimilikinya. Salah satu upaya peningkatan kekuatan baja yaitu dengan ...
    • Thermoelectric Generator Module as An Alternative Source of Electrical Energy in Rural Areas 

      ARKUNDATO, Artoto; MISTO, Misto; JATISUKAMTO, Gaguk; MAULINA, Wenny; SYAH, Khalif Ardian (REKAYASA Jurnal Penerapan Teknologi dan Pembelajaran, 2020-12-03)
      It has been done a research to design a heat-to-electric converter as an alternative electrical energy source based on the thermoelectric generator devices that can convert the heat into the DC electricity. This research ...